A C&D (construction and demolition) dumpster differs from a general cleanout bin because it is built for the heavy, dense debris a build or tear-off produces, framing lumber, torn-off shingles, drywall sheets,…

A C&D (construction and demolition) dumpster differs from a general cleanout bin because it is built for the heavy, dense debris a build or tear-off produces, framing lumber, torn-off shingles, drywall sheets, subfloor, and broken concrete. A dumpster rental is not junk removal: Paydirt Dumpster Rental delivers the empty container and your crew loads it, which keeps the price flat and predictable on a contractor's schedule. The U.S. EPA reports that construction and demolition materials generated more than 600 million tons nationally in a single year, roughly double the weight of municipal trash, so matching the roll-off to the job matters.
Sizing follows the phase. A 10-yard bin ($595) holds about 4 pickup loads and suits a single bathroom gut or a small deck tear-off in Cooper-Young or Vollintine-Evergreen. A 15-yard ($650) or 20-yard ($695) handles a kitchen remodel or a two-room renovation in a Midtown bungalow. A 30-yard ($795) fits a full roof tear-off or a whole-house flip in East Memphis or Harbor Town, holding roughly 12 pickup loads. A 40-yard ($895) is the choice for new-construction framing scrap, large commercial fit-outs, or a demo in Hickory Hill or Whitehaven. The trade-off is driveway footprint versus debris volume: a 40-yard runs about 22 feet long and needs clear overhead access, so on a tight Berclair or Frayser lot a pair of swapped 20-yards sometimes works better than one oversized bin.
Step 1, call (901) 439-3729 or text a photo and describe the material. Step 2, our team recommends a size and gives the flat all-in price before delivery. Step 3, the roll-off arrives on plywood or boards to protect the driveway. Step 4, your crew loads to the fill line marked inside the container, debris must stay level with the top rail so the tarp can close legally for transport. Step 5, call for pickup and the bin is hauled to a permitted facility.
Weight and placement are where surprise charges usually hide on other rentals. Dense material drives those overages, which is why clean concrete, brick, block, and dirt are loaded in a separate low-fill load rather than mixed with light framing scrap, mixing fills a bin by weight long before it fills by volume. Paydirt Dumpster Rental quotes the heavy-material loads up front so the flat price holds. Hazardous items stay out of every C&D bin: no paint, solvents, asbestos, or treated fluids. The household hazardous waste rules and Tennessee's solid waste program govern how those materials must be handled, and a licensed disposal route is required for them.
Contractors on active sites should confirm jobsite debris housekeeping under OSHA 1926.25, which requires scrap and debris be cleared from work areas during construction. A right-sized C&D bin on site keeps nails, offcuts, and shingle debris out of the walking path. For recycling-minded demos, shingle, metal, and clean wood recovery options are listed through local recycling directories, and asphalt-shingle reuse data is tracked by the shingle recycling association.
If the roll-off must sit on a public street or in the right-of-way rather than a private driveway, a permit may apply, the City of Memphis handles right-of-way use through the Public Works division, and Shelby County rules can differ on unincorporated roads. Clean concrete and asphalt from a driveway replacement are often diverted rather than landfilled; the concrete recycling trade group documents those reuse streams. General solid-waste disposal standards are set by state environmental agencies modeled on federal RCRA">federal waste law, and wood-dust and burn limits on a site reference EPA Burn Wise guidance against open burning of C&D scrap.
Every job gets a firm, written price after an on-site visit.
Tell us about your construction & c&d dumpster rental job in Memphis and we'll send a clear, written quote, usually the same day.